Abre em uma nova aba

    Hotel Bedding Size Chart: Complete Dimensions for Sheets, Duvets and Pillowcases

    Hotel Bedding Size Chart: Complete Dimensions for Sheets, Duvets and Pillowcases

Ir para a seção

Correct bedding dimensions are foundational to hotel room presentation and guest comfort. A fitted sheet that pops off the mattress at 2 a.m., a duvet cover that hangs too short, or a pillowcase that leaves the pillow exposed generates negative reviews and unnecessary housekeeping rework. This hotel bedding size chart provides complete dimensions for sheets, duvets, pillowcases, and mattress protectors across all standard North American, European, UK, and Australian bed sizes. Whether you are a hotel procurement manager specifying new linens, a resort operator standardizing across international properties, or an Airbnb host furnishing multiple rooms, this reference ensures every piece fits perfectly the first time.

Why Bedding Dimensions Matter in Hospitality

Ill-fitting bedding affects more than aesthetics. A fitted sheet with insufficient pocket depth will slip off the mattress, disrupting sleep and generating complaints. A flat sheet cut too narrow cannot be tucked securely under the mattress, leading to an unmade appearance by morning. Duvet covers that are too small bunch uncomfortably, while oversized covers shift and leave the duvet lopsided.

For hotel groups with properties across multiple regions, dimension standardization is even more critical. North American, European, UK, and Australian bed sizes differ significantly, and using the wrong sheet size on an international property results in immediate fit problems. Maintaining a size chart aligned to each property’s local mattress dimensions prevents costly ordering errors and ensures consistency across the brand.

Additionally, the rise of luxury mattress toppers and pillow-top mattresses has increased standard mattress depths from 8–10 inches to 12–16 inches, requiring fitted sheets with deeper pockets than were standard a decade ago. Specifying the correct pocket depth is now as important as the horizontal dimensions.

North American Bedding Sizes

The United States and Canada share the same standard mattress dimensions, though terminology may differ slightly. The table below lists the standard sizes along with recommended sheet and duvet dimensions.

Bed Size Mattress (in) Mattress (cm) Fitted Sheet (in) Flat Sheet (in) Duvet Cover (in)
Twin/Single 39 × 75 99 × 191 39 × 75 × 15 66 × 96 68 × 86
Twin XL 39 × 80 99 × 203 39 × 80 × 15 66 × 102 68 × 90
Full/Double 54 × 75 137 × 191 54 × 75 × 15 81 × 96 86 × 86
Rainha 60 × 80 152 × 203 60 × 80 × 16 90 × 102 90 × 90
Rei 76 × 80 193 × 203 76 × 80 × 16 108 × 102 104 × 90
California King 72 × 84 183 × 213 72 × 84 × 16 102 × 108 104 × 94

Note: The third dimension in fitted sheets is the pocket depth. For mattresses with toppers or pillow-tops exceeding 16 inches, specify deep-pocket sheets with 18–22 inch pockets.

European Bedding Sizes

European mattress sizes use metric dimensions and vary slightly between countries, though the EU-wide standard (EN 1334) provides common reference sizes. Single and double sizes differ significantly from North American equivalents.

Bed Size Mattress (cm) Mattress (in) Fitted Sheet (cm) Duvet Cover (cm)
Single (90) 90 × 200 35 × 79 90 × 200 × 30 140 × 200
Single Long (90) 90 × 220 35 × 87 90 × 220 × 30 140 × 220
Double (140) 140 × 200 55 × 79 140 × 200 × 30 200 × 200
King (160) 160 × 200 63 × 79 160 × 200 × 30 220 × 200
Super King (180) 180 × 200 71 × 79 180 × 200 × 30 260 × 220
Super King Long (180) 180 × 220 71 × 87 180 × 220 × 30 260 × 220
Emperor (200) 200 × 200 79 × 79 200 × 200 × 30 290 × 235

European duvets are typically wider and longer relative to the mattress than North American duvets, providing more overhang. The standard European pillow is square (65 × 65 cm or 80 × 80 cm) rather than rectangular, which affects pillowcase ordering.

UK and Ireland Bedding Sizes

UK bed sizes are distinct from both European and North American standards. The “King” and “Super King” designations differ from EU usage, so always verify dimensions rather than ordering by size name alone.

Bed Size Mattress (cm) Mattress (in) Fitted Sheet (cm) Duvet Cover (cm)
Small Single 75 × 190 30 × 75 75 × 190 × 30 120 × 190
Solteiro 90 × 190 35 × 75 90 × 190 × 30 135 × 200
Small Double 120 × 190 47 × 75 120 × 190 × 30 170 × 200
Duplo 135 × 190 53 × 75 135 × 190 × 30 200 × 200
Rei 150 × 200 59 × 79 150 × 200 × 30 225 × 220
Super King 180 × 200 71 × 79 180 × 200 × 30 260 × 220

Australian Bedding Sizes

Australian bed sizes are metric and have some unique dimensions, particularly the Queen and King sizes, which differ slightly from both UK and EU standards.

Bed Size Mattress (cm) Mattress (in) Fitted Sheet (cm) Duvet Cover (cm)
Solteiro 92 × 188 36 × 74 92 × 188 × 40 140 × 210
King Single 107 × 203 42 × 80 107 × 203 × 40 180 × 210
Duplo 138 × 188 54 × 74 138 × 188 × 40 180 × 210
Rainha 153 × 203 60 × 80 153 × 203 × 40 210 × 210
Rei 183 × 203 72 × 80 183 × 203 × 40 245 × 210
Super King 203 × 203 80 × 80 203 × 203 × 40 270 × 240

Pillow and Pillowcase Dimensions

Pillow sizes vary significantly by region, and using the wrong pillowcase size results in either an overstuffed, ill-fitting appearance or a loose, sloppy pillow. The table below covers standard pillow dimensions and matching pillowcase sizes.

Pillow Type Região Pillow Size (in) Pillow Size (cm) Pillowcase Size (in)
Padrão North America 20 × 26 51 × 66 21 × 32
Rainha North America 20 × 30 51 × 76 21 × 36
Rei North America 20 × 36 51 × 91 21 × 42
European Square Europa 26 × 26 65 × 65 26 × 26 (+2 cm ease)
European Large Europa 31 × 31 80 × 80 31 × 31 (+2 cm ease)
UK Standard UK 19 × 29 48 × 74 20 × 30
UK King UK 19 × 36 48 × 91 20 × 37
Australian Standard Austrália 18 × 28 46 × 71 19 × 29
Australian King Austrália 18 × 36 46 × 91 19 × 37
Boudoir/Decorative Global 12 × 16 30 × 40 12.5 × 16.5

Hotels commonly use a combination of sleeping pillows and decorative pillows. A typical North American king bed is dressed with two king-size sleeping pillows, two standard or queen pillows, and two to three European square shams. Always specify pillowcase sizes separately from sleeping pillow sizes when ordering, as shams and decorative covers may use different dimensions.

Mattress Protector and Mattress Pad Sizes

Mattress protectors and fitted pads must match both the mattress dimensions and depth. With pillow-top mattresses and toppers adding 2–4 inches of height, it is critical to specify the total sleep surface depth, not just the mattress height.

Bed Size Protector Size (in) Fits Mattress Depth (in) Metric Size (cm)
Gêmeo 39 × 75 Up to 18 99 × 191 × 46
Twin XL 39 × 80 Up to 18 99 × 203 × 46
Full 54 × 75 Up to 18 137 × 191 × 46
Rainha 60 × 80 Up to 20 152 × 203 × 51
Rei 76 × 80 Up to 20 193 × 203 × 51
Cal King 72 × 84 Up to 20 183 × 213 × 51

When using a mattress topper, measure the combined height of the mattress plus topper and add 2 inches for tuck allowance. For example, a 12-inch mattress with a 3-inch topper requires a protector or fitted sheet with a 17-inch minimum pocket depth. Youmian Textile’s hotel mattress protectors are available in all standard sizes with stretch-to-fit skirts that accommodate depths up to 22 inches.

Understanding Fitted Sheet Pocket Depth

Pocket depth is one of the most common sources of bedding fit problems. The pocket is the corner section of the fitted sheet that wraps around the mattress edge. A properly fitted sheet pocket should be 2–3 inches deeper than the mattress height (including toppers) to ensure the sheet stays securely in place during sleep.

  • Standard pocket: 7–14 inches. Fits basic mattresses without toppers.
  • Deep pocket: 15–18 inches. Fits pillow-top mattresses and those with thin toppers.
  • Extra-deep pocket: 19–22 inches. Fits thick pillow-top mattresses with 3+ inch toppers.

Always verify the actual pocket depth with your manufacturer, as labeling can be inconsistent. Some suppliers label a 14-inch pocket as “deep,” while others reserve that term for 16+ inches. Request a spec sheet and physically test-fit a sample on your exact mattress and topper combination before placing a bulk order.

How to Measure for Hotel Bedding

To ensure accurate ordering, follow this measurement protocol for each bed configuration in your property:

  • Mattress width: Measure across the top surface from left edge to right edge. Do not include the side panels.
  • Mattress length: Measure from head edge to foot edge across the top surface.
  • Mattress depth: Measure from the top surface to the bottom edge, including any pillow-top layer. Add topper height if used.
  • Duvet dimensions: Measure the duvet insert itself, not the duvet cover. The cover should be 2–3 cm (1 inch) larger than the insert to allow for easy insertion and a plush appearance.
  • Pillow dimensions: Measure from seam to seam across the center of the pillow. Pillows can be up to 1 inch larger than their labeled size due to fill expansion.

Common Bedding Sizing Mistakes and How to Avoid Them

Mistake 1: Ordering by Size Name, Not Dimensions

A “King” size bed in the UK is 150 × 200 cm, while a King in the US is 193 × 203 cm—nearly 17 inches wider. A US King sheet will not fit a UK King bed. Always order by centimeter or inch dimensions, and maintain a size matrix for every property region.

Mistake 2: Ignoring Mattress Depth Increases

Older stock sheets with 12-inch pockets will not fit new 14-inch pillow-top mattresses with 2-inch toppers. When upgrading mattresses, re-specify all fitted sheets and protectors simultaneously.

Mistake 3: Not Accounting for Shrinkage

100% cotton sheets can shrink 2%–5% after the first industrial wash. Specify sanforized (pre-shrunk) fabric and order finished dimensions that account for 2%–3% shrinkage. A fitted sheet labeled 60 × 80 inches should measure 60 × 80 after washing, not before.

Mistake 4: Mismatched Duvet and Cover Sizes

A duvet cover that is exactly the same size as the insert will be difficult to put on and will appear flat. Specify covers 2–5 cm larger in each dimension. Conversely, an oversized cover allows the insert to shift and bunch.

Mistake 5: Overlooking Pillow Variations

Hotels often use multiple pillow types per bed. Standardizing on one pillow size across all beds simplifies inventory and laundry sorting, but may not suit all bed configurations. Document each pillow SKU by size, fill type, and position (sleeping vs. decorative).

Perguntas frequentes

What is the difference between a duvet and a comforter in hotels?

A duvet is a plain insert filled with down, down-alternative or microfiber that lives inside a removable, washable duvet cover; a comforter is a finished cover with a permanently attached exterior washed as one unit. Most hotels run duvets with covers because the cover launders between guests while the insert needs only occasional washing—and sizing matters: a cover held 2–5 cm larger than the insert sits easier and looks plumper.

How much should a hotel duvet overhang the mattress?

A properly sized hotel duvet should hang 12–18 inches below the mattress top on each side and at the foot, or approximately one-third of the distance to the floor. For a standard Queen bed (60 × 80 inches), a 90 × 90-inch duvet provides 15 inches of side overhang. For a King (76 × 80 inches), a 104 × 90-inch duvet provides 14 inches of side overhang.

Do hotel sheets use flat or fitted sheets?

Most North American hotels use both a fitted sheet and a flat top sheet plus a duvet; European and many Asian hotels often skip the flat sheet and use a fitted sheet with a duvet, simplifying bed-making and cutting laundry volume. Choose based on brand standards and guest expectations per market, and size generously given deeper mattresses—standard mattress depths have grown from 8–10 to 12–16 inches, so specify a pocket 2–3 inches deeper than the mattress (including toppers).

What does “par level” mean and how does it affect sizing orders?

Par level is the number of complete linen sets required per room. A 3-par setup means one set on the bed, one in the laundry, and one in storage. For a 200-room hotel at 3 par with Queen beds, you need 600 Queen fitted sheets, 600 flat sheets, 600 pillowcase pairs, and 200–400 duvet covers depending on change frequency. Always order 10%–15% extra above par to account for items in stain treatment or retirement.

Can I use the same sheet sizes for twin and twin XL beds?

No. A Twin XL mattress is 5 inches longer than a standard Twin (80 vs. 75 inches). A standard Twin flat sheet may work in a pinch, but a Twin fitted sheet will not fit a Twin XL mattress. Hotels with both bed types—common in properties with mix-and-match room configurations—should maintain separate SKUs and clearly label storage shelves to prevent cross-contamination in the laundry.

Conclusion

Bedding dimensions are a detail that directly impacts guest experience and operational efficiency. A well-fitted sheet stays in place, a correctly sized duvet cover looks polished, and the right pillowcase creates a crisp, inviting bed. By maintaining a comprehensive size chart organized by region, measuring actual mattress depths including toppers, and ordering by dimension rather than size name, hotel procurement teams can eliminate fit errors and reduce linen waste.

Youmian Textile manufactures conjuntos de cama para hotéis, pillows, e mattress protectors in all standard North American, European, UK, and Australian sizes. With OEKO-TEX, GOTS, and ISO 9001 certifications, a 20,000㎡ finishing base in Nantong plus a 46,000㎡ weaving base, and flexible Personalização OEM/ODM including custom dimensions and deep-pocket fitted sheets, we support hotels, resorts, and linen rental companies worldwide. We do not set a fixed order threshold — stock fabric and in-house weaving keep 30–45 day lead times available at any order size. Entre em contato conosco to request a size-specific spec sheet, sample, or customized quotation for your property.

Quer saber mais sobre nossos produtos?

Veja todos os produtos agora