1. Remove dirty linenClean linen as per guest exchange standard (check for stains and breakage).

2. Broaching machineHold the end of the bed with both hands, lift the bed 10-20CM and pull it out, so that its bed is about 50-60CM away from the headboard (1. Pay attention to check the bed frame, mattress for damage. Make sure the mattress is flush with the bed frame. 2. There is no hair on the surface of the protective pad)

3. The protective pad flat, put the four corners of the protective pad on the mattress, and check whether it is placed correctly (pay attention to whether the protective pad has stains, if there are stains, it should be replaced and washed.)

4. Put sheets onPlace the folded sheet face up at the end of the bed, with 2CM rolled edge for width and 1CM rolled edge for length. The width of the sheet with the thumb, index finger and middle finger tense the sheet and open it, using air buoyancy, so that the middle line of the sheet is consistent with the center of the mattress, and the drooping length of the four sides is equal; When wrapping the corner, pay attention to the same direction, and ask for full bed corners, crisp corners, and flat bed surface. (Note three bread bed/four bread bed)